#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
cdd20e3f |
|
18-Apr-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "pxe: Allow extlinux booting without CMDLINE enabled"" As reported by Jonas Karlman this series breaks booting on some AArch64 platforms with common use cases. For now the best path forward is to revert the series. This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc. Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/ Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
b2acf59b |
|
18-Apr-2024 |
Alexey Romanov <avromanov@salutedevices.com> |
fastboot: introduce 'oem board' subcommand Currently, fastboot protocol in U-Boot has no opportunity to execute vendor custom code with verifed boot. This patch introduce new fastboot subcommand fastboot oem board:<cmd>, which allow to run custom oem_board function. Default implementation is __weak. Vendor must redefine it in board/ folder with his own logic. For example, some vendors have their custom nand/emmc partition flashing or erasing. Here some typical command for such use cases: - flashing: $ fastboot stage bootloader.img $ fastboot oem board:write_bootloader - erasing: $ fastboot oem board:erase_env Signed-off-by: Alexey Romanov <avromanov@salutedevices.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
c30e0842 |
|
14-Dec-2023 |
Simon Glass <sjg@chromium.org> |
doc: Mention fastboot dependency on CMDLINE The fastboot 'boot' command only supports running a U-Boot command if CONFIG_CMDLINE is enabled. Mention this in the documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Tom Rini <trini@konsulko.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
16f79dd4 |
|
05-Jan-2024 |
Ion Agorria <ion@agorria.com> |
fastboot: add oem console command support "oem console" serves to read console record buffer. Signed-off-by: Ion Agorria <ion@agorria.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20240105072212.6615-7-clamor95@gmail.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
f3d914cf |
|
16-Dec-2022 |
Sean Anderson <sean.anderson@seco.com> |
fastboot: Add OEM run command This adds the UUU UCmd functionality as an OEM command. While the fastboot tool allows sending arbitrary commands as long as they are prefixed with "oem". This allows running generic U-Boot commands over fastboot without UUU, which is especially useful when not using USB. This is really the route we should have gone in the first place when adding these commands. While we're here, clean up the UUU Kconfig a bit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Heiko Schocher <hs@denx.de>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
bc820d5b |
|
10-Feb-2021 |
Heiko Schocher <hs@denx.de> |
fastboot: add UUU command UCmd and ACmd support add support for the UUU commands ACmd and UCmd. Enable them through the Kconfig option CONFIG_FASTBOOT_UUU_SUPPORT base was commit in NXP kernel 9b149c2a2882: ("MLK-18591-3 android: Add FSL android fastboot support") and ported it to current mainline. Tested this patch on imx6ul based board. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
403c2e46 |
|
05-Feb-2021 |
Sean Anderson <sean.anderson@seco.com> |
doc: Document partition specifications This documents the way U-Boot understands partitions specifications. This also updates the fastboot documentation for the changes in the previous commit. Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
0c0394b5 |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the eMMC boot configuration Add command oem bootbus which executes the command ``mmc bootbus <id> <arg>`` on the current fastboot mmc device (<i> = CONFIG_FASTBOOT_FLASH_MMC_DEV) to set the eMMC boot configuration on first update, with <arg> = boot_bus_width reset_boot_bus_width boot_mode $> fastboot oem bootbus:<boot_bus_width> <reset_boot_bus_width> <boot_mode> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
|
#
b2f6b97b |
|
27-Jan-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
fastboot: add command to select the default emmc hwpart for boot Add fastboot command oem partconf which executes the command ``mmc partconf <id> <arg> 0`` on the current <id> mmc device to configure the eMMC boot partition with <arg>: boot_ack boot_partition, so the command is: $> fastboot oem partconf:<boot_ack> <boot_partition> The partition_access argument is forced to 0 (userdata) Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> [lukma - Kconfig adjustments after merging this patch]
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
a17c0cb8 |
|
29-Jun-2020 |
Filip Brozovic <fbrozovic@gmail.com> |
fastboot: Support defining raw partitions without a partition table Add support for defining raw fastboot partitions in eMMC by specifying the offset and size in an environment variable. Optionally, the eMMC hardware partition number may also be specified. This makes it possible to e.g. update only part of the eMMC boot partition, instead of having to write the entire partition. Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|
#
586a1bf5 |
|
24-Jan-2020 |
Sam Protsenko <joe.skb7@gmail.com> |
doc: android: Convert to Sphinx format Convert Android documentation from regular txt format to Sphinx (RST). Also add Android index.rst file and reference it in root index.rst, so that Android documentation is visible. Test: $ make htmldocs $ xdg-open doc/output/index.html Signed-off-by: Sam Protsenko <joe.skb7@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
|