configs: arbel: Use generic timer and npcm reset driver

Modify defconfig to use generic timer and npcm reset driver

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

mtd: Make CONFIG_MTD be the gate symbol for the menu

The help for CONFIG_MTD explains that it needs to be enabled for various
things like NAND, etc to be available. It however then doesn't enforce
this dependency and so if you have none of these systems present you
still need to disable a number of options. Fix this by making places
that select/imply one type of flash, but did not do the same, also do
this for "MTD". Make boards which hadn't been enabling MTD already but
need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it
wasn't previously enabled but was now being implied.

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: arbel: Enable full functions

Enable more functions/commands for arbel evb.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: nuvoton: npcm8xx: Disable CONFIG_SPI_FLASH_USE_4K_SECTORS

disable this config to improve flash program time

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

board: nuvoton: arbel: change uboot load address

use new memory layout and change uboot load address.
open tpm, tee and more config feature

No need to reserve top memory because the reserved space
is moved to the bottom area of memory.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

ARM: config: enable function for nuvoton npcm845 bmc

Enable npcm845 i2c、ethernet、REGULATOR and security feature

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

mtd: Make CONFIG_MTD be the gate symbol for the menu

The help for CONFIG_MTD explains that it needs to be enabled for various
things like NAND, etc to be available. It however then doesn't enforce
this dependency and so if you have none of these systems present you
still need to disable a number of options. Fix this by making places
that select/imply one type of flash, but did not do the same, also do
this for "MTD". Make boards which hadn't been enabling MTD already but
need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it
wasn't previously enabled but was now being implied.

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: arbel: Enable full functions

Enable more functions/commands for arbel evb.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: nuvoton: npcm8xx: Disable CONFIG_SPI_FLASH_USE_4K_SECTORS

disable this config to improve flash program time

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

board: nuvoton: arbel: change uboot load address

use new memory layout and change uboot load address.
open tpm, tee and more config feature

No need to reserve top memory because the reserved space
is moved to the bottom area of memory.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

ARM: config: enable function for nuvoton npcm845 bmc

Enable npcm845 i2c、ethernet、REGULATOR and security feature

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: arbel: Enable full functions

Enable more functions/commands for arbel evb.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: nuvoton: npcm8xx: Disable CONFIG_SPI_FLASH_USE_4K_SECTORS

disable this config to improve flash program time

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

board: nuvoton: arbel: change uboot load address

use new memory layout and change uboot load address.
open tpm, tee and more config feature

No need to reserve top memory because the reserved space
is moved to the bottom area of memory.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

ARM: config: enable function for nuvoton npcm845 bmc

Enable npcm845 i2c、ethernet、REGULATOR and security feature

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: nuvoton: npcm8xx: Disable CONFIG_SPI_FLASH_USE_4K_SECTORS

disable this config to improve flash program time

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

board: nuvoton: arbel: change uboot load address

use new memory layout and change uboot load address.
open tpm, tee and more config feature

No need to reserve top memory because the reserved space
is moved to the bottom area of memory.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

ARM: config: enable function for nuvoton npcm845 bmc

Enable npcm845 i2c、ethernet、REGULATOR and security feature

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

board: nuvoton: arbel: change uboot load address

use new memory layout and change uboot load address.
open tpm, tee and more config feature

No need to reserve top memory because the reserved space
is moved to the bottom area of memory.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

ARM: config: enable function for nuvoton npcm845 bmc

Enable npcm845 i2c、ethernet、REGULATOR and security feature

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

board: nuvoton: arbel: change uboot load address

use new memory layout and change uboot load address.
open tpm, tee and more config feature

No need to reserve top memory because the reserved space
is moved to the bottom area of memory.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

ARM: config: enable function for nuvoton npcm845 bmc

Enable npcm845 i2c、ethernet、REGULATOR and security feature

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

board: nuvoton: arbel: change uboot load address

use new memory layout and change uboot load address.
open tpm, tee and more config feature

No need to reserve top memory because the reserved space
is moved to the bottom area of memory.

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

ARM: config: enable function for nuvoton npcm845 bmc

Enable npcm845 i2c、ethernet、REGULATOR and security feature

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

ARM: config: enable function for nuvoton npcm845 bmc

Enable npcm845 i2c、ethernet、REGULATOR and security feature

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Enable npcm845 i2c、ethernet、REGULATOR and security feature

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

ARM: config: enable function for nuvoton npcm845 bmc

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

usb: ohci: Use a flexible array member for portstatus

The struct is only used to overlay the MMIO region, so the behavior is
the same. This obsoletes the Kconfig option for the number of ports.

Signed-off-by: Samuel Holland <samuel@sholland.org>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>

arm: nuvoton: Add support for Nuvoton NPCM845 BMC

Add basic support for the Nuvoton NPCM845 EVB (Arbel).

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>