spl: binman: Disable u_boot_any symbols for i.MX93 boards

This is extending commit 6516c9b349b3 ("spl: binman: Disable u_boot_any
symbols for i.MX8M boards") to i.MX93 boards.

Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>

vbe: Add Kconfig options for VPL

Enable the various features needed in VPL, by adding Kconfig options.

Update the defconfig for sandbox_vpl so that the build for each phase
includes what is needed. Drop LZMA for now and make sure partition support
is omitted in SPL, since it is not needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

vpl: fix reference in comment to non-existing SPL_SERIAL_SUPPORT

Since commit 2a7360666871 ("serial: Rename SERIAL_SUPPORT to SERIAL")
SPL_SERIAL_SUPPORT is named SPL_SERIAL. So let's update the comment to
point to the correct Kconfig option in the comment of VPL_SERIAL.

Fixes: 747093dd408 ("vpl: Add Kconfig options for VPL")
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

spl: binman: Disable u_boot_any symbols for i.MX8M boards

The i.MX8M boards use partially specified binman images which have an
SPL entry without a U-Boot entry. This would normally cause an error due
to the 'u_boot_any' binman symbols declared by BINMAN_UBOOT_SYMBOLS
requiring a U-Boot-like entry in the same image as the SPL.

However, a problem in the ARMv8 __image_copy_start symbol definition
effectively disables binman from attempting to write any symbols at all,
so everything appears to work fine until runtime. A future patch fixes
the issue in the linker scripts, which lets binman fill in the symbols,
which would result in the build error described above.

Explicitly disable the 'u_boot_any' symbols for i.MX8M boards. They are
already effectively unusable, and they are incompatible with the boards'
current binman image descriptions.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

spl: binman: Add config options for binman symbols in VPL

The SPL code declares binman symbols for U-Boot phases depending on
CONFIG_IS_ENABLED(BINMAN_UBOOT_SYMBOLS). This config exists for SPL and
TPL, also add a version for VPL.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

spl: Move all VPL, TPL and PowerPC specific CONFIG options to separate files

- Move all PowerPC (and some shared with Layerscape) options to
common/spl/Kconfig.nxp
- Move all other TPL related options to common/spl/Kconfig.tpl
- Move all VPL related options to common/spl/Kconfig.vpl

This makes the whole of common/spl/Kconfig slightly more readable.

Signed-off-by: Tom Rini <trini@konsulko.com>

vbe: Add Kconfig options for VPL

Enable the various features needed in VPL, by adding Kconfig options.

Update the defconfig for sandbox_vpl so that the build for each phase
includes what is needed. Drop LZMA for now and make sure partition support
is omitted in SPL, since it is not needed.

Signed-off-by: Simon Glass <sjg@chromium.org>

vpl: fix reference in comment to non-existing SPL_SERIAL_SUPPORT

Since commit 2a7360666871 ("serial: Rename SERIAL_SUPPORT to SERIAL")
SPL_SERIAL_SUPPORT is named SPL_SERIAL. So let's update the comment to
point to the correct Kconfig option in the comment of VPL_SERIAL.

Fixes: 747093dd408 ("vpl: Add Kconfig options for VPL")
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

spl: binman: Disable u_boot_any symbols for i.MX8M boards

The i.MX8M boards use partially specified binman images which have an
SPL entry without a U-Boot entry. This would normally cause an error due
to the 'u_boot_any' binman symbols declared by BINMAN_UBOOT_SYMBOLS
requiring a U-Boot-like entry in the same image as the SPL.

However, a problem in the ARMv8 __image_copy_start symbol definition
effectively disables binman from attempting to write any symbols at all,
so everything appears to work fine until runtime. A future patch fixes
the issue in the linker scripts, which lets binman fill in the symbols,
which would result in the build error described above.

Explicitly disable the 'u_boot_any' symbols for i.MX8M boards. They are
already effectively unusable, and they are incompatible with the boards'
current binman image descriptions.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

spl: binman: Add config options for binman symbols in VPL

The SPL code declares binman symbols for U-Boot phases depending on
CONFIG_IS_ENABLED(BINMAN_UBOOT_SYMBOLS). This config exists for SPL and
TPL, also add a version for VPL.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

spl: Move all VPL, TPL and PowerPC specific CONFIG options to separate files

- Move all PowerPC (and some shared with Layerscape) options to
common/spl/Kconfig.nxp
- Move all other TPL related options to common/spl/Kconfig.tpl
- Move all VPL related options to common/spl/Kconfig.vpl

This makes the whole of common/spl/Kconfig slightly more readable.

Signed-off-by: Tom Rini <trini@konsulko.com>

vpl: fix reference in comment to non-existing SPL_SERIAL_SUPPORT

Since commit 2a7360666871 ("serial: Rename SERIAL_SUPPORT to SERIAL")
SPL_SERIAL_SUPPORT is named SPL_SERIAL. So let's update the comment to
point to the correct Kconfig option in the comment of VPL_SERIAL.

Fixes: 747093dd408 ("vpl: Add Kconfig options for VPL")
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

spl: binman: Disable u_boot_any symbols for i.MX8M boards

The i.MX8M boards use partially specified binman images which have an
SPL entry without a U-Boot entry. This would normally cause an error due
to the 'u_boot_any' binman symbols declared by BINMAN_UBOOT_SYMBOLS
requiring a U-Boot-like entry in the same image as the SPL.

However, a problem in the ARMv8 __image_copy_start symbol definition
effectively disables binman from attempting to write any symbols at all,
so everything appears to work fine until runtime. A future patch fixes
the issue in the linker scripts, which lets binman fill in the symbols,
which would result in the build error described above.

Explicitly disable the 'u_boot_any' symbols for i.MX8M boards. They are
already effectively unusable, and they are incompatible with the boards'
current binman image descriptions.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

spl: binman: Add config options for binman symbols in VPL

The SPL code declares binman symbols for U-Boot phases depending on
CONFIG_IS_ENABLED(BINMAN_UBOOT_SYMBOLS). This config exists for SPL and
TPL, also add a version for VPL.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

spl: Move all VPL, TPL and PowerPC specific CONFIG options to separate files

- Move all PowerPC (and some shared with Layerscape) options to
common/spl/Kconfig.nxp
- Move all other TPL related options to common/spl/Kconfig.tpl
- Move all VPL related options to common/spl/Kconfig.vpl

This makes the whole of common/spl/Kconfig slightly more readable.

Signed-off-by: Tom Rini <trini@konsulko.com>

spl: binman: Disable u_boot_any symbols for i.MX8M boards

The i.MX8M boards use partially specified binman images which have an
SPL entry without a U-Boot entry. This would normally cause an error due
to the 'u_boot_any' binman symbols declared by BINMAN_UBOOT_SYMBOLS
requiring a U-Boot-like entry in the same image as the SPL.

However, a problem in the ARMv8 __image_copy_start symbol definition
effectively disables binman from attempting to write any symbols at all,
so everything appears to work fine until runtime. A future patch fixes
the issue in the linker scripts, which lets binman fill in the symbols,
which would result in the build error described above.

Explicitly disable the 'u_boot_any' symbols for i.MX8M boards. They are
already effectively unusable, and they are incompatible with the boards'
current binman image descriptions.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

spl: binman: Add config options for binman symbols in VPL

The SPL code declares binman symbols for U-Boot phases depending on
CONFIG_IS_ENABLED(BINMAN_UBOOT_SYMBOLS). This config exists for SPL and
TPL, also add a version for VPL.

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>

spl: Move all VPL, TPL and PowerPC specific CONFIG options to separate files

- Move all PowerPC (and some shared with Layerscape) options to
common/spl/Kconfig.nxp
- Move all other TPL related options to common/spl/Kconfig.tpl
- Move all VPL related options to common/spl/Kconfig.vpl

This makes the whole of common/spl/Kconfig slightly more readable.

Signed-off-by: Tom Rini <trini@konsulko.com>