sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

sandbox: move sandbox specifics to booti_setup()

Instead of checking a configuration setting in booti_start() adjust the
sandbox implementation of booti_setup().

Write a console message when trying to run the booti command on the sandbox
indicating that it is not supported.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Move enable/disable_interrupts out of common.h

Move these two functions into the irq_funcs.h header file. Also move
interrupt_handler_t as this is used by the irq_install_handler() function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

cmd: booti: Store OS start and end info in images structure

Store the start and end of the OS image that is loaded in images
structure.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

RISCV: image: Add booti support

This patch adds booti support for RISC-V Linux kernel. The existing
bootm method will also continue to work as it is.

It depends on the following kernel patch which adds the header to the
flat Image. Gzip compressed Image (Image.gz) support is not enabled with
this patch.

https://patchwork.kernel.org/patch/10925543/

Tested on HiFive Unleashed and QEMU.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Karsten Merker <merker@debian.org>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

bootm: Rename do_bootm_states() to bootm_run_states()

Rename the function to bootm_run_states() to better indicate ts
purpose. The 'do_' prefix is used to indicate a command processor,
which this is now not.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

bootm: Drop arguments from do_bootm_states()

Use the bootm_info struct to hold the information required by bootm.

Now that none of the functions called from do_bootm_states() needs an
argv[] list, change the arguments of do_bootm_states() as well. Take
care to use the same value for boot_progress even though it is a little
inconsistent.

For booti make sure it only uses argv[] and argc at the top of the
function, so we can eventually refactor to remove these parameters.

With bootm, some OSes need access to the arguments provided to the
command, so set these up in the bootm_info struct, for bootm only.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

booti: Avoid use of #ifdef

Use the compiler to get the set of states, instead of the preprocessor.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

sandbox: Add a dummy booti command

Add basic sandbox support for 'booti' so we can start to boot the test
ARMbian image. This is helpful in checking that it is parsed correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Introduce functions to obtain command arguments

Add some functions which provide an argument to a command, or NULL if
the argument does not exist.

Use the same numbering as argv[] since it seems less confusing than the
previous idea.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Tom Rini <trini@konsulko.com>

bootm: Adjust the parameters of bootm_find_images()

Rather than passing it all the command-line args, pass in the pieces
that it needs. These are the image address, the ramdisk address/name
and the FDT address/name.

Ultimately this will allow usage of this function without being called
from the command line.

Move the function comment to the header file and tidy it a little.

Signed-off-by: Simon Glass <sjg@chromium.org>

bootm: Support boot measurement

Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

cmd: Convert existing long help messages to the new macro

- Generally we just drop the #ifdef CONFIG_SYS_LONGHELP and endif lines
and use U_BOOT_LONGHELP to declare the same variable name as before
- In a few places, either rename the variable to follow convention or
introduce the variable as it was being done inline before.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

treewide: Drop bootm_headers_t typedef

This is not needed and we should avoid typedefs. Use the struct instead.

Signed-off-by: Simon Glass <sjg@chromium.org>

global: Convert simple_strtoul() with hex to hextoul()

It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.

Add a proper comment to simple_strtoul() while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>

common: Drop asm/global_data.h from common header

Move this out of the common header and include it only where needed. In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly. Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

cmd: booti: convert the debug print about image move to printf

Moving of the OS image may have some nasty side effects like corrupting
DTB. Convert the current debug print to printf so that the relocation of
the OS is always obvious to the user.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

common: bootm: add checks to verify if ramdisk / fdtimage overlaps OS image

These cases are typically fatal and are difficult to debug for random
users. Add checks for detecting overlapping images and abort if overlap
is detected.

Signed-off-by: Tero Kristo <t-kristo@ti.com>

cmd: booti: Fix spelling of "environment".

Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Reviewed-by: Simon Glass <sjg@chromium.org>

common: Drop log.h from common header

Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>

command: Remove the cmd_tbl_t typedef

We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Add compressed Image parsing support in booti.

Add compressed Image parsing support so that booti can parse both
flat and compressed Image to boot Linux. Currently, it is difficult
to calculate a safe address for every board where the compressed
image can be decompressed. It is also not possible to figure out the
size of the compressed file as well. Thus, user need to set two
additional environment variables kernel_comp_addr_r and filesize to
make this work.

Following compression methods are supported for now.
lzma, lzo, bzip2, gzip.

lz4 support is not added as ARM64 kernel generates a lz4 compressed
image with legacy header which U-Boot doesn't know how to parse and
decompress.

Tested on HiFive Unleashed and Qemu for RISC-V.
Tested on Qemu for ARM64.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[trini: Fix minor rST formatting problems]
Signed-off-by: Tom Rini <trini@konsulko.com>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>

image: Rename load_addr, save_addr, save_size

These global variables are quite short and generic. In fact the same name
is more often used locally for struct members and function arguments.

Add a image_ prefix to make them easier to distinguish.

Signed-off-by: Simon Glass <sjg@chromium.org>