arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arm64: zynqmp: zynqmp-zcu106-revA: Fix DP PLL configuration

This patch fixes the DP audio and video PLL configurations
for the zynqmp-zcu106-revA evaluation board.

The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)

Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.

Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/62538b4a04dee28a6fc8ac5b85f8c845a5a76aa4.1651740988.git.michal.simek@amd.com

arm64: zynqmp: Remove low level UART setting

There is no reason to do serial initialization. Uart driver does it already
based on DT. Good effect is that it is clear which interface is console.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>