Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

board: vscom: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

tree-wide: Replace http:// link with https:// link for ti.com

Replace instances of http://www.ti.com with https://www.ti.com

Signed-off-by: Nishanth Menon <nm@ti.com>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm: baltos: remove TI board leftover

Remove unneeded pinmux configurations and TI EEPROM struct.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

board: add support for Vision System's Baltos Industrial PC

Vision Systems's Baltos is based on AM335x SoC
from Texas Instruments. This patch adds support
such Industrial PCs in mainline u-boot.

[ balbi@ti.com: updated original patch to current u-boot ]

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

board: vscom: Remove <common.h> and add needed includes

Remove <common.h> from this board vendor directory and when needed
add missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

tree-wide: Replace http:// link with https:// link for ti.com

Replace instances of http://www.ti.com with https://www.ti.com

Signed-off-by: Nishanth Menon <nm@ti.com>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm: baltos: remove TI board leftover

Remove unneeded pinmux configurations and TI EEPROM struct.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

board: add support for Vision System's Baltos Industrial PC

Vision Systems's Baltos is based on AM335x SoC
from Texas Instruments. This patch adds support
such Industrial PCs in mainline u-boot.

[ balbi@ti.com: updated original patch to current u-boot ]

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

tree-wide: Replace http:// link with https:// link for ti.com

Replace instances of http://www.ti.com with https://www.ti.com

Signed-off-by: Nishanth Menon <nm@ti.com>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

arm: baltos: remove TI board leftover

Remove unneeded pinmux configurations and TI EEPROM struct.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

board: add support for Vision System's Baltos Industrial PC

Vision Systems's Baltos is based on AM335x SoC
from Texas Instruments. This patch adds support
such Industrial PCs in mainline u-boot.

[ balbi@ti.com: updated original patch to current u-boot ]

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

arm: baltos: move the board to CONFIG_BLK

Use DM for both MMC and USB subsystems and use dedicated DTS
for U-Boot configuration.

Disable SPL support for GPIO and remove EVMSK leftover for
DDR power control via GPIO.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND

Add more clarity by changing the Kconfig entry name.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[trini: Re-run migration, update a few more cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>