#
d678a59d |
|
18-May-2024 |
Tom Rini <trini@konsulko.com> |
Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"" When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
483b799b |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: st: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
776bf6a5 |
|
11-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Merge tag 'u-boot-stm32-20211012' of https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e69c4143 |
|
01-Sep-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
board: stm32: Remove the bi_boot_params initialization The stm32 platforms never had to support an ATAGs-based Linux Kernel, so remove the bi_boot_params initialization. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> |
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
38ac6a1b |
|
09-Apr-2021 |
dillon min <dillon.minfei@gmail.com> |
board: Add rt-thread art-pi board support All these files are add for support rt-thread art-pi board - add board/st/stm32h750-art-pi, defconfig, header support for u-boot for more information about art-pi, please goto: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
483b799b |
|
30-Apr-2024 |
Tom Rini <trini@konsulko.com> |
board: st: Remove <common.h> and add needed includes Remove <common.h> from this board vendor directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com> |
#
776bf6a5 |
|
11-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Merge tag 'u-boot-stm32-20211012' of https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e69c4143 |
|
01-Sep-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
board: stm32: Remove the bi_boot_params initialization The stm32 platforms never had to support an ATAGs-based Linux Kernel, so remove the bi_boot_params initialization. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> |
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
38ac6a1b |
|
09-Apr-2021 |
dillon min <dillon.minfei@gmail.com> |
board: Add rt-thread art-pi board support All these files are add for support rt-thread art-pi board - add board/st/stm32h750-art-pi, defconfig, header support for u-boot for more information about art-pi, please goto: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
776bf6a5 |
|
11-Oct-2021 |
Tom Rini <trini@konsulko.com> |
Merge tag 'u-boot-stm32-20211012' of https://source.denx.de/u-boot/custodians/u-boot-stm - Disable ATAGS for STM32 MCU and MPU boards - Disable bi_boot_params for STM32 MCU and MPU boards - Update stm32-usbphyc node management - Convert CONFIG_STM32_FLASH to Kconfig for STM32 MCU boards - Convert some USB config flags to Kconfig for various boards - Convert CONFIG_BOOTCOMMAND flag to Kconfig for STM32 F429 board - Remove specific CONFIG_STV0991 flags - Remove unused CONFIG_USER_LOWLEVEL_INIT flag - Add ofdata_to_platdata() callback for stm32_spi driver - Update for stm32f7_i2c driver - Remove gpio_hog_probe_all() from STM32 MP1 board - Fix bind command Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e69c4143 |
|
01-Sep-2021 |
Patrick Delaunay <patrick.delaunay@foss.st.com> |
board: stm32: Remove the bi_boot_params initialization The stm32 platforms never had to support an ATAGs-based Linux Kernel, so remove the bi_boot_params initialization. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> |
#
9774462e |
|
30-Aug-2021 |
Tom Rini <trini@konsulko.com> |
arm: Disable ATAGs support With the exceptions of ds109, ds414, icnova-a20-swac, nokia_rx51 and stemmy, disable ATAG support. A large number of platforms had enabled support but never supported a kernel so old as to require it. Further, some platforms are old enough to support both, but are well supported by devicetree booting, and have been for a number of years. This is because some of the ATAGs related functions have been re-used to provide the same kind of information, but for devicetree or just generally to inform the user. When needed still, rename these functions to get_board_revision() instead, to avoid conflicts. In other cases, these functions were simply unused, so drop them. Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Stefan Bosch <stefan_b@posteo.net> Signed-off-by: Tom Rini <trini@konsulko.com> |
#
38ac6a1b |
|
09-Apr-2021 |
dillon min <dillon.minfei@gmail.com> |
board: Add rt-thread art-pi board support All these files are add for support rt-thread art-pi board - add board/st/stm32h750-art-pi, defconfig, header support for u-boot for more information about art-pi, please goto: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |
#
38ac6a1b |
|
09-Apr-2021 |
dillon min <dillon.minfei@gmail.com> |
board: Add rt-thread art-pi board support All these files are add for support rt-thread art-pi board - add board/st/stm32h750-art-pi, defconfig, header support for u-boot for more information about art-pi, please goto: https://art-pi.gitee.io/website/ Signed-off-by: dillon min <dillon.minfei@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> |